Full Body Clay Cow Leather Soft Ceramic Tile for Exterior and Interior Wall AIA-1 manufacturer from China Hubei Vanjoin Building Co., Ltd.

Full Body Clay Cow Leather Soft Ceramic Tile for Exterior and Interior Wall

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Flexible Clay Cow Leather Soft Ceramic Tile for Exterior and Interior Wall

1.&

Flexible Clay Cow Leather Soft Ceramic Tile for Exterior and Interior Wall

1. Composition of Flexible Soft Ceramic Tile:

Core Material	Inorganic colored mineral sand(Natural raw materials)
	Organic Emulsion
	Vanjoin coupling agent

2. Specification of Flexible Soft Ceramic Tile:

• Thickness: 2.5-4mm
• Size: 300*600/600*600

3. Technical Details of Flexible Soft Ceramic Tile:

Name	Item	Technical Index			Test Method
Name	Item	Side Length≤100mm	100mmSide Length≤300mm	Side Length300mm	HG/T3747.1-2004
Length & Width	Allowable deviation of average size for each sheet to 10 sheets	±3.5%	±1.0%	±0.8%
Thickness	Maximum allowable deviation of average thickness for each sheet to nominal dimension		±0.5mm
Remarks	The length and width shall be based on the upper edge dimension. There's no special requirement for thickness of the products with irregular concave and convex surface,ancient black bricks, and red bricks

4. Application of Flexible Soft Ceramic Tile:

1) All kinds of new and old building constructions of indoor and outdoor decoration;
2) Indoor and outdoor decoration of office buildings, hospitals, shops, restaurants, bars and other

public buildings;
3) Interior and exterior wall decoration of family homes, luxury apartments, villas etc;
4) Particularly suitable for high-rise building exterior wall insulation decoration.

5. Installation of Flexible Soft Ceramic Tile:

1. After basic level processing, setting line, snap the line for positioning.

2. Scrape slurry behind the product, full slurry rate above 80%, pull out jagged lines.

3. Hands moving and pressing, adjust the seam width.

4. Use plastic bag filled of sealant to fill the joints or use silicone adhesive to seal and flap the joints,

press with finger is strictly prohibited.

5. When the sealant is semi-dry, use the steel bar to pull a concave joint.

6. Some place polluted by adhesive & sealant, use batch knife to scrape.

7. Use a dry sponge to remove the ash.

8. Construction completed.