90MM Lightweight Eps Cement Sandwich Wall Panels for Interior Wall AIA-1 manufacturer from China Hubei Vanjoin Building Co., Ltd.

90MM Lightweight Eps Cement Sandwich Wall Panels for Interior Wall

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

90MM Lightweight Eps Cement Sandwich Wall Panels for Interior Wall

> 1. Composit

90MM Lightweight Eps Cement Sandwich Wall Panels for Interior Wall

> 1. Composition of Interior/ Exterior Sandwich Panel:

• Core materials: cement, EPS, sand and additives.

• Surface materials: fiber reinforced calcium silicate board or cement calcium silicate

Board.

> 2. Specification of Interior/ Exterior Sandwich Panel:

• Thickness: 60, 75, 90, 100, 120, 150mm
• Width: 610mm
• Length: 2270mm (custom-made length can be made for volumn order)

Name	Size(LWT)	Weight(KG)	Packing(pcs/ per 20")
VJ light weight compound sandwich panel	227061060	45-48	315 pcs / 436
	227061075	50-53	252 pcs / 349
	227061090	55-58	207 pcs / 287
	2270610100	60-65	189 pcs / 262
	2270610120	65-75	153 pcs / 212
	2270610150	90-90	126 pcs / 175

Remark: All kinds of panels can be customized by customers' specific requirement,

such as density and length of panel.

> 3. Features and Advantages of Interior/ Exterior Sandwich Panel:

Interior/Exterior Sandwich Panel	Fast construction	75-80m2/day three workman
	Sound insulation	46dB
	Space saving	Save 4.26m2 per 100 m2 area
	Anti-seismic	Class 7-8
	Fireproof	4 hours, under 1000 degree centigrade
	Eco-friendly	100% non-asbestos
	Hanging force	Single point hanging force 50kg, Embed hanging force 150kg
	Service Life	60-70years

> 4. Installation of Interior/ Exterior Sandwich Panel:

1. Setting the line and carrying the board in position	Eject double lines of board thickness up and down the axes of installed wall board, and easily carry to the side of wall according to the specification needed;
2. Sawing board	Using hand-hold electric saw to cut freely according to the wall specification.
3. Sizing	Sizing cement on tenon side of two boards, then spread polymer mortar on the tenon side casually;
4. Installation	Carrying the board prepared to be installed to the installation place, correcting the wall board by gavelock and making it close tightly, and let the polymer mortar squeeze out into full and fixing it with a chock temporarily;
5. Correcting, fixing	Using the guiding rule of two meters to check the verticality and leveling correction. Then using 6mm or 8mm reinforcing steel bar and ribs adding with construction sealant to fix;
6. Grouting and filling starch	Filling the strickling the corrected wall board with polymer mortar, filling the big gap with pea gravel concrete;
7. Sticking fiberglass mesh (we can supply )	After the polymer (for filling the gaps) and Wall are shaped, sticking fiberglass mesh on the whole wall with anti-crack mortar.
8. Installing electrical wires and switches	Setting lines on the places needing to be set with concealed wire and switch box, then cut a groove by hand-hold electric saw, filling with polymer mortar after installation
9. Installing doorcase	Preparing door and window holes on the installed wall, anchoraging by splint or lines.
10. Facing coating and wall papers	Scraping putty directly without plastering on the installed wall, then brushing coating and sticking wall paper
11. Facing ceramic tile,decorative sheet	Sticking ceramic tiles or other wood facing panels casually without plastering on installed wall.
12. Electric apparatus installation	Install lights, furniture, air-conditioners casually on installed room ,can be nailed or hanged